LIMITED
WARRANTY
The JOHN FLUKE MFG.
CO.,
INC,, warrants
each instrument
it manufactures
to be free from
defects
in
material and
workmanship
under
normal use and
service for the period
of one year from
date of purchase. This warranty
extends
only to the original
purchaser.
This
warranty shall
not
apply to
fuses,
disposable batteries
{rechargeable
type batteries are
warranted for
90 days),
or
any product
or parts
which have
been
subject to misuse, neglect,
accident
or
abnormal
conditions
of operations.
In the event
of
failure
of
a
product
covered by this
warranty.
John Fluke Mfg.
Co.,
Inc., will repair
and calibrate
an
instrument
returned
to
an authorized
Service Facility
within one year
of the
original
purchase; provided the
warrantor's
examination
discloses
to its
satisfaction
that the
product
was defective. The warrantor
may,
at its option, replace the
product in lieu of
repair. With
regard
to any
instrument
returned within
one year of the original
purchase,
said
repairs
or replacement
will
be made without charge. If
the fault
has
been
caused by
misuse, neglect,
accident or abnormal
conditions
of operations, repairs will
be
billed
at a nominal cost. In
such case, an
estimate will
be
submitted before
work is started,
if requested.
ANY IMPLIED
WARRANTIES
OF MERCHANTABILITY
OR FITNESS
SHALL
BE LIMITED
TO A PERIOD
OF
TWELVE
MONTHS FROM
THE DATE OF
PURCHASE.
THE FOREGOING WARRANTY
IS IN
LIEU OF
ALL
OTHER
WARRANTIES,
EXPRESS
OR IMPLIED,
INCLUDING
BUT
NOT
LIMITED TO ANY
IMPLIED
WARRANTY
OF
MERCHANTABILITY,
FITNESS
OR ADEQUACY FOR
ANY PARTICULAR
PURPOSE
OR
USE. JOHN
FLUKE
MFG.
CO.,
INC.
SHALL
NOT BE LIABLE FOR ANY
SPECIAL,
INCIDENTAL
OR
CONSEQUENTIAL
DAMAGES,
WHETHER
IN CONTRACT, TORT
OR OTHERWISE.
NOTE:
Some states do
notallow limitations
on how long an
implied warranty
lasts, or the
exclusion or
limitation
of incidental
or
consequential
damages, so the
above limitations
or exclusion
may
not
apply
to you. This
warranty
gives
you
specific
legal rights, and
you
may
also have
other rights which
vary
from state
to state.
If any fault develops, the following
steps should be
taken;
1, Notify
the
John
Fluke Mfg.
Co„
fnc.
or
nearest
Service
faciiity,
giving
full details
of
the difficulty,
and include
the
Mode!
number,
type number,
and
serial number,
On
receipt
of this
information, service
data or
shipping
instructions
will be forwarded
to
you.
2. On receipt
of
the
shipping
instructions,
forward
the instrument, transportation
prepaid.
Repairs will
be made at the
Service
Faciiity and
the
instrument returned,
transportation
prepaid.
SHIPPING TO
MANUFACTURER
FOR REPAIR
OR
ADJUSTMENT
All
shipments of John
Fluke
Mfg. Co., Inc.,
instruments should
be made via United
Parcel Service
or "Best
Way“’prepaid.
The
instrument
should be shipped in
the original packing carton;
or
if it
is not available, us© any
suitable container
that is rigid
and
of adequate
size, if
a
substitute container
is used, the instrument
should be
wrapped
in paper and
surrounded
with at least four
inches
of excelsior
or similar
shock-absorbing
material.
CLAIM
FOR
DAMAGE IN SHIPMENT
TO ORIGINAL
PURCHASER
The
instrument should
be
thoroughly
inspected
immediately
upon original delivery
to purchaser.
All material in
the container
should
be
checked against
the enclosed
packing
list. The
manufacturer will not
be responsible
for shortages against
the packing
sheet
unless
notified immediately. If
the
instrument
is damaged
in any way, a claim
should
be
filed with
the
carrier
immediately. (To
obtain
a quotation
to repair shipment
damage,
contact the
nearest Fluke Technical
Center.) Final
claim
and negotiations with
the carrier
must
be completed
by the customer.
The John Fluke
Mfg.
Co..
Inc.
will
be
happy to answer all application
or
use
questions,
which will enhance
your use
of this instrument.
Please address
your
requests
or
correspondence
to: JOHN
FLUKE MFG.
CO.. INC., P.O. Box
43210. MOUNTLAKE
TERRACE,
WASHINGTON
98043, Atten: Sales
Dept.
For
European
Customers: FLUKE
(Nederland) B.V.,
Zevenheuvelenweg
S3,
Tilburg.
The
Netherlands.
*
For
European
customers, Air
Freight prepaid
John
Fluke
Mfg. Co,, Inc. ®
P.O. Box 43210
s
Mountlake
Terrace,
Washington
98043
Rev.
12/77
To Next Page
Loading...
Need help?
General
