Fluke 5100 Series - Meter Connections

5100
Series
Depress the numeric
keyswitches
required
to
11,
The
selected
multiplier
indicator.
if any, illu-
obtain the absolute
value of the desired
frequ-
ency. Select in the
normal
sequence, i.e„
from
the MSD
(left) to the LSD
(right).
NOTE
12.
minates.
Depress
the Hz
keyswitch.
For
a
frequency
entry the MSD is
the only
allowable
significant digit.
13. The
Central
Display
AC
and
Hz
indicators
illuminate.
The frequency
entry appears
on the Central
Display.
14.
Depress the
ENTER
keyswitch.
Select a multiplier,
if required. If
none
is selected
the
instrument
assumes
units.
15.
The
frequency
is displayed
on
the Central
Display
and the
AC
indicator
on
Display
illuminates.
the
Output
Figure
2-12.
Meter
Connections
2-17