sensALIGN 3 sensor firmware update
Update sensor firmware to a newer version
It is possible to carry out a sensor firmware update directly through the rugged touch device. If
a sensor with an older firmware version is connected through Bluetooth to the rugged device, a
sensor firmware update notification appears on the display.
It is recommended to update the sensor firmware. Tap to proceed to update the
sensor. The following sensor firmware update screen appears.
The screen shows that a newer sensor firmware version is available within the rugged touch
device. Tap to update the sensor connected through Bluetooth.
Fluke 831 111
On-board help
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com
To Next Page
Loading...
