stabilization and default tolerance type.
Note
When metric units are used, the resolution of physical quantities used within the
device can be set to two (0.01 mm) or three (0.001 mm) decimal places. This
measurement precision is available in "Measurement", "Results" and "Live Move"
screens. The "Dimensions" screen uses only positive integers.
The set time zone is connected to the default RPM unless the default RPM is edited
independently. When the time zone is set to say "Central America" the default
RPM is 1800. When the "London" time zone is set, the default RPM is 1500.
l
When activated, 'Wireless connection" is used to connect the rugged device to available
WiFi networks.
Fluke 831 19
On-board help
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com
To Next Page
Loading...
