The shown coupling format depends on the type of coupling selected.
To enter any target specifications at the coupling, tap the related value box then proceed to
enter the target value. Use the onscreen keyboard [1] which comes into view when any one of
the four value boxes is tapped. Use to cycle through the value boxes. Alternatively,
tap the desired value box.
Tap [2] to activate target specification values. When target values are enabled, the
coupling [3]within the mini train inset at the top-right corner is shown in orange. After target
values have been entered, tap to proceed.
42 Version:1.0
On-board help
Shop for Fluke products online at:
1.888.610.7664
www.MyFlukeStore.com
To Next Page
Loading...
