Introduction and Specifications
MPS450 Package Contents 1
1-5
Table 1-1. MPS450 Functions (cont.)
Function Category Function Description
Fixed/periodic FHR Fetal / Maternal ECG
(Option)
IUP simulation
The MPS450 simulates a combined fetal and
maternal ECG occurring during labor, as well
as a selection of pressure waveforms
produced by uterine contractions. The
contraction period is adjustable and includes a
manually generated waveform.
RS-232 serial port Remote Operations
RS-232 serial port
MPS450 features include a built-in RS-232
serial port that, when connected to a
computer, enables instrument control through
remote commands. In addition, a special
command can be used to operate the
MPS450 remotely in the numeric-control
mode.
Warning
To prevent personal injury, use the Simulator in the manner
specified in this manual or the protection provided by the
Simulator may be impaired.
MPS450 Package Contents
Standard Equipment
• MPS450 Multiparameter Simulator
Standard Accessories
• MPS450 Operators Manual (P/N 2243350)
• Registration card
• Two 9-volt alkaline batteries (minimum 8 hours continuous use)
• Cardiac-output adapter box (P/N 2226608, standard with Cardiac-Output Option)
Optional Accessories
• Carrying case (P/N 2248623)
• Blood-pressure cables (See your local Fluke Biomedical Representative for
availability)
• Temperature cables (YSI 400 Series: P/N 2391976; 700 Series: P/N 2391983)
• High-level-output cable (P/N 2226958)
• Universal injectate-temperature adapter (P/N 2226800)
• RS-232 cable (P/N 2238659)
• Service Manual (P/N 2243361)
• Battery eliminator (P/N 2720054)
• Contains universal power supply, 9 - 264V, USA, AUS, DEN, IND, ISR,
ITAL, SHK, SWZ and UK
• For power cord order 284174 (USA), 658641 (AUS), 2200218 (DEN),
2200229 (IND), 2200241 (ISR), 2198785 (ITAL), 769422 (SHK), 769448
(SWZ) and 769455 (UK)
To Next Page
