Maintenance and Specifications
Specifications
8
8-9
Self-Calibration Period
To ensure maximum accuracy of test results, perform the self-calibration
procedure, as described in “Calibrating the Test Tool” in Chapter 6, every 30 days.
Notes
All specifications for tests on twisted pair cable apply to cable with
100
Ω
of characteristic impedance. Contact Fluke Networks for
information on measurement performance on cabling with
characteristic impedance other than 100
Ω
.
Compatibility with Remotes and Link Interface Adapters
The DSP-4100 test tool is compatible only with a DSP-4100SR remote unit. The
DSP-4100 remote is not compatible with DSP-100, DSP-2000, or DSP-4000 test
tools. The LIAs are not compatible with DSP-100 or DSP-2000 test tools.
The test tool can store calibration data for two different remotes.
Standard Link Interface Adapters
DSP-LIA011 Basic Link Adapter for Cat 5E
Plug type and life: shielded Cat 5 RJ45; >5000 insertions
Cable type: 100 Ω Cat 6 SsTP
Test supported: shielded and unshielded cable, TIA Cat 3, 4, 5, and 5E basic
links, and ISO/IEC, EN50173 Class C and D permanent links
DSP-LIA012 Channel Adapter for Cat 5E
Plug type and life: shielded Cat 5 RJ45; >5000 insertions
Tests supported: shielded and unshielded cable, TIA Cat 3, 4, 5, and 5E
channels, and ISO/IEC Class C and D channels
To Next Page
Loading...
Need help?
General
