FMC Technologies Smith Meter AccuLoad II User Manual

Section II - Operations
MN06065 Rev. 0.3 (8/97) 11
After power returns the right display will display the
recipe that was being loaded:
Midgrade
After "START" is pressed the batch will continue from
the point of the power failure.
The operator can print a ticket for either a single or a
multiple batch transaction. The upcounter display will
accumulate the total delivery until the transaction is
terminated by printing the ticket, up to six preset
batches, five digits up to 99,999 volume units.
Remote Ticket Printer (Print Key)
When operating with a remote ticket printer or a
shared printer the following occurs:
1. The AccuLoad II left-hand display switches from:
Blender Ready 8:07:15
to
Select Recipe
when the “SET” button is pressed. The operator
would then follow the same steps that have been
described in the description for the Local Ticket
Printer.
2. At the end of the batch the AccuLoad II display
will alternate between:
1000 Gal P 1000 0
AND
Preset Completed
until the transaction is terminated by the operator
by pressing the “PRINT” button. When the
“PRINT” button is pressed the display will return
to:
Blender Ready 8:15:15
All other operations for the Remote Printer or the
Shared Printer are the same as described for opera-
tion with the Local Printer.

FMC Technologies Smith Meter AccuLoad II Specifications

General

Brand	FMC Technologies
Model	Smith Meter AccuLoad II
Category	Measuring Instruments
Language	English