FOR-A MFR-3100EX - Channel Name Import Commands (10); System Size Request Command (11)

71
7-3-6. Channel Name Import Commands (10)
K: commands allow you to import Source and Destination names from the device that sends
K: commands to the MFR system.
◆ Command Format
Command
Command response
K:<S or D><S or L or A><No.>,<Dat>
Echo
Prompt
BYTE No.
1
2
3
4
5-7
8
9
Command
K
:
S
S
000-3FF
,
CR
D
L
000-1FF
A
BYTE 3
<S or D> Select between S (Source) or D (Destination)
BYTE 4
<S or L or A > Select the destination to which names are imported.
S: Source Name or Destination Name, ID Name (Kanji) fields on the Web GUI.
L: Source Name or Destination Name, Import Name fields on the Web GUI.
A: Source Name or Destination Name, Name (ASCII) fields on the Web GUI.
BYTE5-7
<No.> Indicates the channel number.
Source: 000-3FF, Destination: 000-1FF
BYTE9-
<Dat> Channel names
Strings in Hex characters (max. 128 bytes). Character code: UTF-8
CR
Carriage return
7-3-7. System Size Request Command (11)
F? Commands allow you to obtain MFR-3100EX system size.
◆ Command Format
Command
Command response
@[sp]F?<Lvl>
F:<Lvl><Dst Size>,<Src Size>/< Dst Size >,<Src Size>
BYTE No.
1
2
3
4
5
6
Command
@
[sp]
F
?
<Lvl>
CR
BYTE No.
1
2
3
4
5
6
7
8
9
10
11
Response
F
:
<Lvl>
<Dst
Size>
,
<Src
Size>
/
<Dst
Size>
,
<Src
Size>
CR
<Dst Size>: Destination channel number
<Src Size>: Source channel number
◆ Command / Response Example
Response
@ F?0
Echo
F:0FF,FF/FF,FF
256 destination channels and 256 source channels.
CR LF
>
Prompt