FOR-A MFR-3100EX - Audio Input Setting Command (13)

73
7-3-9. Audio Input Setting Command (13)
This command allows you to setup audio inputs (streams) for MFR-8MADIPO/8AESPO.
► [Web-based Control: Audio Settings - Input Type page]
◆ Command Format
Command
@[sp]AA:<SlotNo.><Grp>/<I-No>,<L-Lvl><L-Src><T#>
Command response
AA:<SlotNo.><Grp>/<I-No>,<L-Lvl><L-Src><T#>
Parameter
<SlotNo.>
0-8
Slot9 to Slot17
<Grp>
0
0: Group1
<I-No>
0-7
Input channel (stream)
CH1 to CH8
<L-Lvl>
0-7
Level1 to Level8
<L-Src>
0-3FF,,
FFF,
7FF
Logical input channel (Logical No./Name)
0-3FF: SRC1 to SRC1024
FFF: No assignment
(*1)
7FF: Main MTX
(*2)
<T#>
T0-T4
Input signal type
T0: None
T1: SDI
T2: AES/EBU
T3: MADI (1 to 32)
T4: MADI (32 to 64)
(*1)
If set to “no assignment” for <L-Src>, set “0” and “T0” for <L-Lvl> and <T#>.
(*2)
If set to “Main MTX” for <L-Src>, set “0” for <L-Lvl>.
◆ Command / Response Example
Assign Level1 SRC129 (AES/EBU signal) to Group1 Input Channel 8 (on Slot 11).
Command
Parameter
Description
@ AA:
2
<SlotNo.>
Slot11
0
<Grp>
Group1
/
7
<I-No>
CH8
,
0
<L-Lvl>
Level1
80
<L-Src>
SRC129
T2
<T#>
AES/EBU
Response
Description
AA: 20/7,080T2
The requested assignment has succeeded: Level1
SRC129(AES/EBU signal) to Group 1 Input Channel 8
on Slot 11.