Fossil WRIST PDA User Manual

Introduction to the Wrist PDA Watch
Recharging the watch
Wrist PDA User Guide 13
IMPORTANT: Do not use a pen, pencil, or any other sharp
object to write on the screen. A spare stylus is included with the
watch. If you misplace your stylus, visit www.fossil.com for
information on getting a replacement.
If you have difficulty accurately selecting items on the screen, you
may need to calibrate the screen (see page 112).
USB cable
The USB cable lets you recharge the watch and synchronize
information between your Wrist PDA and the Palm Desktop software
using HotSync technology. Connect the USB cable to the USB port
on the side of the watch when recharging (see page 13) or to
perform a HotSync operation (see page 95).
Recharging the watch
A battery level indicator appears on the
Launcher screen:
To avoid losing data, always recharge
your watch before the power runs out
completely.
NOTE: If the watch ever fully discharges and you lose data, you
can get back any previously synchronized data by synchronizing
the watch and Palm Desktop software (see page 95). To reduce
the risk of data loss, synchronize your watch and your computer
often.
Battery level
indicator

Fossil WRIST PDA Specifications

General

Brand	Fossil
Model	WRIST PDA
Category	Watch
Language	English