Beaming Information
Receiving beamed information
Wrist PDA User Guide
93
NOTE: Some applications are copy-protected and cannot be
beamed, as indicated by a lock icon.
4. When the Beam Status dialog box appears, point the IR port directly
at the IR port of the receiving device.
When the Beam Status dialog box indicates that the transfer is
complete, you can resume working on your watch.
Receiving beamed information
To receive beamed information you must first make sure that the
Beam Receive option in General Preferences is on (see page 86).
To receive beamed information:
1. Switch to PDA mode (see page 15).
2. Point the IR port directly at the IR port of the transmitting device to
open the Beam Status dialog box.
3. Tap Yes.
4. Wait for the Beam Status dialog box to indicate that the transfer is
complete, and then tap OK to display the new entry.
5. Incoming records are placed in the Unfiled category.
TIP: To conserve battery power, turn the Beam Receive option
off when you’re not using it (see page 86).
To Next Page
Loading...
Need help?
General