VM200 UserÕs Guide
You can adjust the level (-
∞
, -90 to 0dB) in 128 increments. The
default setting is 0dB.
Note:
If you try to operate the Gain rotary control while the ADD.AUX
parameter is turned ON, the VM200 displays a warning message and you
will be unable to adjust the REC-B Gain. Use the EQ/LO-MID Gain rotary
control (channels 3/4) to turn off the ADD.AUX parameter on the
CURRENT
SCENE STATUS
function page.
EQ/HI
EQ/HI-MIDEQ/LO-MIDEQ/LO
GAIN
FREQ
PAN
Q
PAN
FREQ
QFREQ
Q
FREQ Q
GAINGAINGAIN
PANPANPANPANPANPAN
To Next Page
Loading...
