Fostex VM200 - Scene Memory Section; [RECALL] Key; [STORE] Key

[SOLO] Key
VM200 User’s Guide 31
[SOLO] Key
The [SOLO] key in the Rec Buss section enables you to solo the
Record Buss.
Scene Memory Section
The Scene Memory section includes [RECALL] and [STORE] keys that
enable you to recall scenes from memory and store new scenes to
memory.
A “scene” is a collection or “snapshot” of virtually all the parameter
settings of the VM200 at a given point in time.
[RECALL] Key
Pressing the [RECALL] key displays the SCENE MEMORY RECALL function
page.
You can use the Data Wheel or
[</-1] and [+1/>] keys to scroll
through the list of stored and preset scenes.
Press the
[RECALL] key again to recall the scene from memory and
remain in Scene Memory mode, or press the
[ENTER] key to recall the
scene and exit Scene Memory mode.
[STORE] Key
The [STORE] key enables you to store scenes in Scene Memory.
Pressing the
[STORE] key displays the SCENE MEMORY STORE function
page.
Press the
[ENTER] key to display the SCENE MEMORY NAME EDIT function
page, then name the new Scene Memory. Press the
[ENTER] key again
to store the scene in memory.
REC BUSS
SOLO
SCENE MEMORY
STORERECALL