Fostex VM200 - Page 138

Effects
138 VM200 User’s Guide
6. Press the [ENTER] key.
The VM200 displays the EFF LIBRARY NAME EDIT function page. The
title box shows the program number and the current name.
Use any Gain, Freq, and Q rotary controls to re-assign a name to
the Effect program.
You can also press the
[</-1] and [+1/>] keys to move the cursor
and rotate the Data Wheel to select characters or numbers.
Refer to step 4 of “Storing Effects Programs” on page 135 for
information on assigning a name.
7. When you’ve finished re-naming the program, press the
[ENTER] key to store the new Effect program title.
The following warning dialog appears for a brief moment.
After the warning, the VM200 displays the EFF EDIT function page.
8. Press the [EXIT] key any time to exit the EFF LIBRARY STORE or EQ
LIBRARY NAME EDIT
function pages.
The VM200 displays the CHANNEL EDIT function page.
Warning: Do not power off the VM200 while it is writing to the flash
memory or you may damage the VM200.
character-selector
title boxcharacter set box
cursor