Digital Connections
170
VM200 User’s Guide
2.
Press the
[EQ EDIT]
keys for channels to which you wish to
send the S/P DIF signal.
You can assign multiple channels.
On the display, the indicators for the assigned channel pairs
highlight (darken), and their
[EQ EDIT]
keys light up in paired uni-
son.
In the example above, channels 7–8 are assigned to receive the
S/P DIF signal.
3.
Press the
[CHANNEL/METER]
key or
[EXIT]
key.
The VM200 displays the
CHANNEL EDIT
function page.
Note:
Since S/P DIF carries a two-channel signal, you must always set
the channels in pairs. For example, if you select channel 1 to assign S/P
DIF signal, channel 2 will be also selected and paired. You do not need
to pair the channels using the Pairing function in this case.
To Next Page
Loading...
