Copying Channel Settings
VM200 User’s Guide 73
The selected [EQ EDIT] key(s) light up. The CHANNEL COPY function
page highlights (enables) the selected destination channel(s) as fol-
lows.
5. Press the [ENTER] key to execute the copy operation.
The CHANNEL COPY function page flashes the word “COMPLETE!” on
the display for a few seconds, and the VM200 displays the first CH
COPY function page.
6. Press the [EXIT] key or the [CHANNEL/METER] key to return to
Channel Edit mode.
Note: Even if channels are paired, you can copy to and from each
of the paired channels independently.
To Next Page
Loading...
