FP PRO PAK'R - 2.5 Machine Users; 2.6 Workplace; 2.7 Personal Protective Equipment

PRO PAK’R User Manual Version 1.0 Page -11-
FP InternationalFP International
2.5 mAchine users
2.5.1 operAtors (level 1)
In the operating software, this class of user will handle the tasks in the menus “operator”
The machine may only be operated by adults who have familiarized themselves with the chapters
“Safety” and “Operating Instructions” of this manual and will comply with their content.
No special training is required.
Some previous experience in handling this type of equipment is required.
The operator’s duties will generally consist of:
• Fitting new rolls of lm
• Producing strips of lm
• Dening and applying the preset parameters (supervisor only)
• Cleaning the machine (exterior).
2.5.2 mAintenAnce personnel (level 2)
In the operating software, this class of user will handle the tasks in the menu “service”.
Maintenance staff should be aware of the added risk involved in the type of work they are to carry
out. In addition to the requirements listed under “Operators “ above, maintenance personnel
should therefore have:
• an HND in a relevant subject or know-how equivalent to that qualication;
• experience in maintaining machines;
• the necessary resources at their disposal (e.g. tools and measuring equipment).
2.6 workplAce
The denition of and requirements for the workplace are an area of 1 meter at both the front and
the rear of the machine. This provides sufcient room for all operating tasks to be carried out
and allows the machine to be placed over a roller conveyor belt, for example.
2.7 personAl protective equipment
No PPE is required to operate the machine.
2 sAfety