FP PRO PAK'R - 3.3 Loading Film

PRO PAK’R User Manual Version 1.0 Page -18-
FP International
3.3 loAding film
3 operAting instructions
Press the Start button as soon as the
machine is ready.
5
1
2
Slide the lm roll on the roll holder.
The lm unwind direction to be as
shown on the picture.
Pull the lm towards the ll-tube tip.
Use the feed down button on the
control panel to feed the lm all the
way through the machine.
3 4
Open the air channel of the lm-roll
and pull it over the ll-tube until you
feel resistance.