PRO PAK’R User Manual Version 1.0 Page -12-
FP International
2.8 emergency switch
To allow the machine to be stopped as
quickly as possible in case of an emergency,
it has been tted with a clearly recognizable,
bright red emergency switch.
If the emergency switch is pressed in,
the machine will stop instantly.
The switch will remain mechanically disabled,
preventing the machine from restarting.
In case of personal injury, rst aid can then be provided without delay. Other emergency steps
should also be taken immediately.
Once the crisis has been resolved, the emergency switch can be re-enabled. The machine will not
restart automatically and should be started up in the normal manner.
The emergency switch may also be used in suddenly arising cases, for example when the machine
malfunctions or jams materials.
Recommendations:
• Allow novice operators to practise using the emergency switch;
• Regularly test the due functioning of the machine;
• Never re-enable the emergency switch until you are fully convinced that it is safe to do so. Find
out who used the emergency switch and why.
2.9 cAutions on the mAchine
The cautionary notices afxed onto the machine must remain clearly legible. Replace if worn.
The texts are included under “Warnings” on page 28
The risks in question are described more closely in the sections on operating and maintenance
instructions.
2.10 fire And other emergencies
No special instructions apply in case of re or other emergencies. Normally applicable
extinguishing media can be used.
2 sAfety
To Next Page
Loading...