FP PRO PAK'R - English; Table of Contents

PRO PAK’R User Manual Version 1.0 Page -4-
FP International
contents
ABOUT THIS MANUAL 3
MACHINE IDENTIFICATION 3
THE MANUFACTURER 3
SERVICE CENTRES 3
FOREWORD 5
USING THE MANUAL 5
TYPOGRAPHIC CONVENTIONS 6
SERVICE AND INFORMATION 6
WARRANTY AND LIABILITY 7
1 INTRODUCTION 8
1.1 Intention of Use 8
1.2 Glossary of Machine Terms and Jargon 8
1.3 Models and Accessories 8
1.3.1 Standard Machine and accessories 8
1.3.2 Not included with the machine 9
2 SAFETY 10
2.1 Introduction 10
2.2 Safety Features 10
2.3 Safety Rules 10
2.4 Unauthorized Use 10
2.5 Machine Users 11
2.5.1 Operators (level 1) 11
2.5.2 Maintenance Personnel (level 2) 11
2.6 Workplace 11
2.7 Personal Protective Equipment 11
2.8 Emergency switch 12
2.9 Cautions on the machine 12
2.10 Fire and other emergencies 12
3 OPERATING INSTRUCTIONS 13
3.1 Construction and operating controls 13
3.1.1 Conguration 13
3.1.2 Control panel keypad instructions 16
3.1.3 Control panel display symbols 16
3.2 Starting up the machine 17
3.3 Loading Film 18
3.3.1 General instructions to operate the machine 19
3.3.2 Changing Menu Setting 20
3.3.3 Display Errors 21
3.3.4 Moving 21
3.3.5 Setting up 21
3.4 Cleaning 22
3.5 Transport/storage 22
3.5.1 General 22
3.5.2 Storage 22
3.6 Commissioning 23
3.7 Repair and maintenance 23
3.7.1 Replacing blades / cone tip 23
3.7.1.1 Change cone tip 23
3.7.1.2 Replace blade / new cutting edge 23
3.7.2 Replacing wear strips 24
3.7.3 Cleaning backing wheel 24
3.7.4 Replacing backing wheel 24
3.7.5 Extention wide lm 24
3.8 Troubleshooting 25
4 SPECIFICATION 26
4.1 Machine specication 26
4.1.1 General 27
4.1.2 Product to be processed 26
4.2 Electrical specication 26
4.3 Machine environment 27
4.4 Directives and Standards applied 27
5 INDICATIONS ON THE MACHINE 28
5.1 Machine Identication Plate 28
5.2 Warnings 29
EC DECLARATION OF CONFORMITY 30