FP PRO PAK'R - Introduction; 1.1 Intention of Use; 1.2 Glossary of Machine Terms and Jargon; 1.3 Models and Accessories

PRO PAK’R User Manual Version 1.0 Page -8-
FP International
1 introduction
1.1 intention of use
The machine is intended for the production of air lled cushions. The inated air cushions can be cut
at a desired quantity, then serves as void-ll for packaging purposes.
See “Product to be processed” on page 22 for precise details of suitable kinds of lm to be processed.
1.2 glossAry of mAchine terms And JArgon
Pedal: A control mechanism (transport and sealing of lm, starting up of presets) by
means of a foot switch.
Display: Image shown on the screen.
Control panel: Screen operated by buttons, to access control functions.
RFID: We equip every PRO PAK’R roll with an RFID tag that holds information about
the optimal sealing temperature and ination levels.
The controls are explained under “Operating Instructions ” on page 13.
1.3 models And Accessories
1.3.1 stAndArd mAchine And Accessories
The standard version consists of the assembled unit complete with:
• Machine (Inator), including power cord.
• >500mm wide lm (Optional)
• Stand (Optional)
• Pedal (Optional)
• Sensor (Optional)
Warning!
In case processing > 500mm wide lm, use the wide lm
kit.
If needed, read the instruction carefully.
Use the >500mm wide lm kit for rolls;
• larger then 500mm (width).
• and heavier than 15 kg (weight).
