Free2Move eSolutions eProWallbox - Page 17

17
Installation Manual
Before proceeding with the installation, make sure that:
• Theinputpoweriscompletelyswitchedoandremainsinthiscondition
until installation is complete.
• As the work area is considered a dangerous zone it has been adequately
cordonedoinordertopreventtheaccessbypersonsnotinvolvedinthe
installation operations. The appliance is not installed in conditions of rain,
fog or high humidity.
• The appliance’s packaging is perfectly intact and free from obvious
damage. If the appliance and/or its packaging are damaged, please
request support from the following link: www.esolutions.free2move.
com/contact-us/
• The appliance and all its components are completely intact and free of
any obvious defects or faults. If any damage is noted, the installation
procedure must be abandoned immediately, and technical support must
be contacted.
WARNING
The design of the entire electrical system to which the appliance
is to be connected must rst be determined by a qualied
professional. The electrical data of the appliance, which should be
referred to in order to correctly gauge the size of the power supply
system, is displayed on the appliance’s identication label.
WARNING
Installation should not be carried out with wet hands and no jets of
water should be aimed at the appliance.