4
Installation Manual
1 INTRODUCTION
1.1 Purpose of the Manual
This installation manual is a guide to help operators to work safely and carry out the
installation operations needed to keep the appliance in good working order.
Thepurposeofthisdocumentistosupportqualiedtechnicianswhohavereceived
appropriate training, and demonstrated suitable skills and knowledge in the
construction, installation, operation and maintenance of electrical equipment.
If the applianceis used in a manner not specied in thismanual, the protection
provided by the appliance may be impaired. This document contains the information
required for the installation of the appliance.
This document has been carefully checked by the Manufacturer Free2move
eSolutions S.p.A. but oversights cannot be completely ruled out. If any errors are
noted, please inform Free2move eSolutions S.p.A. Except for explicit contractual
obligations, under no circumstances may Free2move eSolutions S.p.A. be held liable
for any loss or damage resulting from the use of this manual, or from installation of
the equipment. This document was originally written in English. In the event of any
inconsistencies or doubts, please ask Free2move eSolutions S.p.A. for the original
document.
1.2 Identication of the Manufacturer
The manufacturer of the appliance is:
Free2move eSolutions S.p.A.
Piazzale Lodi, 3
20137 Milan – Italy
www.esolutions.free2move.com
1.3 Structure of the installation Manual
Thismanualisdividedintochaptersbasedondierenttopicsandcontainingall
the information that is needed to install the appliance safely.
Each chapter is sub-divided into paragraphs which examine the fundamental points,
and each paragraph may have its own title, along with sub-titles and a description.
1.4 Safety
This manual contains important safety instructions that must be followed during
installation of the appliance.
To Next Page
Loading...
