Free2Move eSolutions eProWallbox - Required tools

19
Installation Manual
3.3 Required tools
• Torx screwdriver T20 1/4”
• Drill with ø10 mm 3/8” bit
• Phillips screwdriver (minimum length = 160mm)
• Slotted screwdriver (head < 2mm)
• Cutter
• Hammer
• Pencil
• Spirit level
• Measuring tape
• Adhesive tape
T20 1/4”
NOTE
Itispossibletoreplacethe2box-cablesheathjunctionswithø25mmcablegland
(not provided by the Manufacturer).
WARNING
Do not use an electrical screwdriver to assemble the wallbox or to
x it to the wall. Free2move eSolutions S.p.A. declines any liability
for damage to persons or things arising from use of such tools.