Boiler maintenance
Inspection, cleaning and maintenance
Page 32
B0190806
s
5.1 Inspection, cleaning, and maintenance
Regular cleaning of the boiler extends its life and is a basic
requirement for smooth running.
So clean the boiler regularly!
5.1.1 Inspection
Checking the combustion chamber and pellet burner
Check the boiler regularly for dirt:
Shut down the boiler using the
key and allow it to cool down
Open the insulating door and
combustion chamber door
Cleaning the combustion chamber
and pellet burner
Page 34, Cleaning the pellet burner
Checking the level of the ash
The amount of ash depends on the boiler’s output!
P2 ash drawer module:
Open insulation door
Loosen the star-shaped screw knob
on the front ash drawer by turning it
to the left
Pull out the ash drawer and check the
level
Empty the ash drawer if necessary
Page 33, Emptying the ash
drawer (P2 ash drawer module)
P2 ash screw module:
Open insulation door
Open the clamps on the left and right
Remove the lid and check the ash
level
Empty the ash container if necessary
Page 33, Emptying the ashcan
(P2 ash screw module)
To Next Page
Loading...
Need help?
General