Connecting AB Profinet
Safety
WARNING!
An electric shock can be fatal.
Before opening the device:
▶
Move the mains switch to the "O" position
▶
Unplug the device from the mains
▶
Put up an easy-to-understand warning sign to stop anybody inadvertently switching
it back on again
▶
Using a suitable measuring instrument, check to make sure that electrically charged
components (e.g. capacitors) have been discharged
WARNING!
Work that is carried out incorrectly can cause serious injury or damage.
▶
The activities described below must only be carried out by trained and qualified per-
sonnel.
▶
Refer to the safety rules in the power source Operating Instructions.
Connection
sockets and indi-
cators on the bus
module
Anybus-S Profinet RT bus module
(1) Interface to UBST 1 PC board
(2) Profinet connection socket
(3) Anybus-S status indicator
(4) LED indicator
57
EN
To Next Page
Loading...