© FRONIUS 2013 22
1.7 Sectional flexible rails for pipes
The flexible rail for pipes consists of a combination of flexible guide segments.
Segments are available in the following lengths:
Segment type Length
I 1130 mm (44.5 in)
II 1695 mm (66.7 in)
III 1884 mm (74.2 in)
Combining these guide segments enables use on pipes made of hardened spring
steel mounted using the 0–58 mm radial fixing mechanism with the magnetic or
resistive bridge.
The rail is designed for pipe diameters of 1560–3360 mm (10 units).
The number of segments depends on the pipe diameter:
DIAMETER
SEGMENTS
BRIDGES
1560 - 1740 mm
(61.4 - 68.5 in)
3x type I
1x type II
18
1740 - 1920 mm
(68.5 - 75.6 in)
3x type III
1x type I
18
1920 - 2100 mm
(75.6 - 82.7 in)
3x type III
1x type II
20
2100 - 2280 mm
(82.7 - 89.8 in)
3x type III
2x type I
21
2280 - 2460 mm
(89.8 - 95.9 in)
5x type II
25
2460 - 2640 mm
(95.9 - 103.9 in)
3x type III
2x type II
25
2640 - 2820 mm
(103.9 - 111 in)
5x type II
1x type I
25
2820 - 3000 mm
(111 - 118.1 in)
6x type II
28
3000 - 3180 mm
(118.1 - 125.2 in)
3x type III
3x type II
30
3180 - 3360 mm
(125.2 - 132.3 in)
6 x type III
30
The distance ‘M’ to set on the pitch must be read from Table 1.
To Next Page
Loading...
