© FRONIUS 2013 4
2. Technical data
Power supply 24 V DC, 100 W
Travel direction Forward, backward (along the rail)
Drive Gear motor with gear and rail guide
Guiding mechanism 4 guide rollers
Rail type
Rigid, L = 1884mm
Flexible, L = 1884mm
(inner/outer curvature radius at least
1500/1100mm)
Orbital (for pipes Ø200–1560mm)
Sectional (for pipes Ø1560–3360mm)
Rail fixing Magnetic bridge, resistive bridge
Minimum workpiece type and thickness Ferromagnetic steel of 5 mm
Torch type MIG/MAG, CMT
Torch diameter 16-35 mm
Welding direction
Horizontal
Vertical
Orbital (180⁰ from bottom to top)
Travel speed
5–150 cm/min horizontally
5–135 cm/min vertically
Direction change / stop
Stops after reaching the limit switch
Changes direction after reaching the limit switch
End crater filling 0–5 s
Torch position
adjustment range
up-down 28 mm
left-right 28 mm
Oscillation
OSC type linear
OSC modes straight, trapezoid, triangle, rectangle
OSC offset 0–50 mm
OSC amplitude 2–30 mm
OSC speed 5-400 cm/min
OSC dwell
time
left 0–3 s
center 0–3 s
right 0–3 s
Maximum pulling force
450 N (horizontally)
300 N (vertically)
Dimensions with OSC 543 (L) × 352 (W) × 304 (H)
Dimensions without OSC 480 (L) × 314 (W) × 334 (H)
Carriage weight with OSC
(without remote control)
14.5 kg
Carriage weight without OSC(without remote
control)
12.5 kg
Remote control weight
1.5 kg
Control box without cable 5,3 kg
Welding device cable 1,5 kg
To Next Page
Loading...
