Fronius FlexTrack 45 - Screw Feet Bridge with or Without Distance Block

© FRONIUS 2013 24
15. Screw feet bridge with or without distance block
Screw feet bridges are designed for mounting the (sectional) orbital guide on pipes.
Thanks to its modular structure, the bridge can be easily extended to a version with
the distance block, using M6x20 screws. The screw feet bridge consists of a
mounting bar and the metrical scale.
The fixing range is 58 mm, while using the distance block further extends the range
by 40 mm.
To assemble the screw feet bridge with the fixing mechanism or with the support, or
the metrical scale with the support, use two M6x14 screws.
The bridge must be assembled only when dismounted from the track.
Screw feet bridge
with metrical scale
Screw feet bridge with metrical scale and
distance block
Distance block
M6x20 screw
Metrical scale