© FRONIUS 2013 43
1.21 Lubricating oscillator gear rack
Move out the arm maximally.
Remove the guide cover from the oscillator by unscrewing three M5 screws.
Use a brush to clean the gear rack, and lubricate the gear rack near the oscillator
body with EP2 grease.
IMPORTANT!
Perform lubrication once a month.
1.22 Lubricating oscillator rolling guide
Remove the guide cover from the oscillator by unscrewing three M5 screws.
Use a lubricator with head diameter of 12 mm to introduce 2 g of EP2 grease into
the grease nipple.
IMPORTANT! Perform lubrication every six months.
M5 screw
guide cover
gear rack
grease nipple
To Next Page
Loading...
