Fronius Robacta TC 2000 - Parting Agent Types and Their Use

19
EN
Parting agent
types and their
use
NOTE!
Parting agents are not included in the scope of supply.
Parting agent types and their use:
- "Robacta TC Cool +" parting agent for immersing the welding torch in the dipping bowl
- "Robacta Reamer" parting agent for spraying the welding torch after the cleaning op-
eration
It is recommended that the dipping bowl should be used for:
- Gas-cooled welding torches
- Water-cooled welding torches in the upper power range (hot gas nozzles)
Spraying the welding torch with "Robacta Reamer" parting agent is recommended for all
applications.