73
EN
Technical data
General
NOTE!
An inadequately dimensioned electrical installation can cause serious damage.
The mains cable and its fuse must be dimensioned to suit the device being used. The tech-
nical data shown on the rating plate applies.
Robacta TC 2000,
Robacta TC 2000
Twin
Robacta TC 2000
US, Robacta TC
2000 Twin US
Mains voltage 230 V
Mains voltage tolerance -10% / +10%
Mains frequency 50/60 Hz
Nominal output 180 W
Mains fuse protection (slow-blow) 10 A
Compressed air supply 6 bar
86.99 psi
Minimum cleaning interval from 20 s
Dipping bowl minimum capacity 0.75 l
0.20 gal.
Degree of protection IP 21
Dimensions l/w/h 330 / 250 / 422 mm
12.99 / 9.84 / 16.61 in.
Weight (without "Robacta TC Cool / Robacta TC Cool MD" part-
ing agent)
24.4 kg
53.79 lb.
EMC emission class A
Mark of conformity CE, CSA
Mains voltage 110 V
Mains voltage tolerance -5% / +5%
Mains frequency 50/60 Hz
Nominal output 180 W
Mains fuse protection (slow-blow) 10 A
Compressed air supply 6 bar
86.99 psi
Minimum cleaning interval from 20 s
Dipping bowl minimum capacity 0.75 l
0.20 gal.
Degree of protection IP 21
Dimensions l/w/h 330 / 250 / 422 mm
12.99 / 9.84 / 16.61 in.
Weight (without "Robacta TC Cool / Robacta TC Cool MD" part-
ing agent)
24.4 kg
53.79 lb.
EMC emission class A
Mark of conformity CE, CSA
To Next Page
Loading...
