Fronius Robacta TC 2000 - Connecting the Cleaning Device to the Robacta Reamer Parting Agent Container

50
Connecting the cleaning device to the "Robacta
Reamer" parting agent container
Connecting the
cleaning device
to the "Robacta
Reamer" parting
agent container
NOTE!
Only use "Robacta Reamer" parting agent supplied by the manufacturer.
The composition of the manufacturer's parting agent is intended specifically for the Robac-
ta TC. If other manufacturers' products are used, trouble-free operation cannot be guaran-
teed.
1
NOTE!
The parting agent spray time must be set on the robot control.
A minimum spray time of 0.5 seconds can be set.
A spray time of approx. 0.7 seconds is recommended. This may vary depending on the size
of the gas nozzle.
5
2
3
1
4
7
6
1