EasyManua.ls Logo

Fronius Robacta TC 2000 - Safety

Fronius Robacta TC 2000
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
39
EN
Safety
Safety Observe the following safety rules for all work described in the "Installation and start-up"
section.
WARNING!
Incorrect operation or poorly executed work can cause serious injury or damage.
All activities described in these operating instructions may only be carried out by trained
and qualified personnel. All functions described in these operating instructions may only
be used by trained and qualified personnel. Do not carry out any of the work or use any of
the functions described until you have fully read and understood the following documents:
these operating instructions
all the operating instructions for the system components, especially the safety rules
WARNING!
Machines that start up automatically can cause serious injury and damage.
In addition to these operating instructions, the safety rules issued by the manufacturer of
the robot and welding system must also be observed. For your personal safety, ensure that
all protective measures have been taken and will remain in place while you are in the work-
ing area of the robot.
WARNING!
Risk of serious injury from electric shock and mechanically powered parts.
Before performing work on the cleaning device or any connected system components:
disconnect the customer's compressed air and power supplies from the cleaning de-
vice and the connected system components
ensure that they remain disconnected until all work is complete
using a suitable measuring instrument, ensure that electrically charged components
(e.g., capacitors) have been discharged
WARNING!
Whenever the cleaning device is supplied with voltage and/or compressed air, a risk
of serious injury exists from:
the magnetic field surrounding the cleaning opening
flying parts (shavings, etc.)
compressed air/parting agent mixture escaping from the cleaning opening
activated wire cutter
If work has to be performed on the cleaning device while it is supplied with voltage and/or
compressed air:
keep all ferromagnetic parts, such as tools, away from the device
keep your body, especially your hands, face and hair, any objects and all clothing away
from the cleaning opening and the wire cutter
wear ear protection
wear protective goggles with side protection

Table of Contents

Other manuals for Fronius Robacta TC 2000

Related product manuals