Fronius Robacta TC 2000 - Robacta TC 2000, Robacta TC 2000 US Connections and Mechanical Components

33
EN
NOTE!
If the dipping bowl in use, it should be refilled with parting agent as soon as the fill
level indicator lights up.
NOTE!
The cleaning function of the Robacta TC remains available even if the fill level indi-
cator is illuminated.
(4) Discharge key
press the key briefly; the cleaning device will perform the following functions:
1. Cleaning is started
press and hold the key; the cleaning device will perform the following functions in se-
quence:
1. Cleaning is started
2. Wire cutter is activated
3. Compressed air/parting agent mixture is sprayed out of the cleaning opening
NOTE!
The cleaning device can only perform these functions if the "Quick Stop" signal is
set and the capacitors are charged.
(5) Ready-to-clean indicator
lights up when the device is ready to clean
Robacta TC 2000,
Robacta TC 2000
US connections
and mechanical
components
Front of device
Rear of device
(4)
(5)
(6)
(2)
(3)
(1)
(7)
(7)
(7)
(7)
(8)
(9)
(10)
(11)