Fronius Robacta TC 2000 - Robacta TC 2000 Twin, Robacta TC 2000 Twin US Connections and Mechanical Components

35
EN
Robacta TC 2000
Twin, Robacta TC
2000 Twin US
connections and
mechanical com-
ponents
Front of device
Rear of device
No. Function
(1) Level sensor
monitors the parting agent fill level in the dipping bowl
(2) Cleaning opening with internal parting-agent injection nozzle
for cleaning the gas nozzle and the inside of the welding torch
for coating the gas nozzle and welding torch interior with parting agent
(3) Dipping bowl with spill tray
NOTE!
If the dipping bowl is not in use, ensure that there are no parting agent residues left
in the bottom.
NOTE!
Ensure that there is always sufficient parting agent in the dipping bowl when in use
(i.
e., ensure that the fill level indicator never lights up).
(4) Standard I/O connection socket (X1)
(5) Mains cable with strain relief device (mains cable not provided with Robacta
TC 2000 Twin US)
(6) Spatter tray for welding residues (in optional installation stand)
(7) Recesses for the wire cutter holder
for attaching the wire cutter holder to the cleaning device
(4)
(5)
(6)
(2)
(3)
(1)
(7)
(7)
(7)
(7)
(8)
(9)
(10)
(11)