21
EN
NOTE!
If the robot control deactivates the "Quick Stop" signal during the program se-
quence, the cleaning device program sequence is interrupted immediately.
For safety reasons the capacitors are discharged via the cleaning coil.
- Automatic refilling of the dipping bowl with "Robacta TC Cool +" parting agent ensures
an optimum fill level in the dipping bowl. After draining the "Robacta TC Cool +" parting
agent container, the fill level in the dipping bowl drops. The level sensor detects that
the level has dropped too low and the fill level indicator lights up. At the same time, the
"Fluid level control" signal is transmitted to the robot control.
- The device cleaning function remains available even if the fill level indicator is il-
luminated.
To Next Page
Loading...
