12
WARNING!
Danger due to unsuitable batteries being connected to the charger.
Escaping gas, fire or explosion may result in serious injury and damage to property.
► Never connect a battery to the charger unless it is compatible in terms of its type, volt-
age and capacity and corresponds to the charger settings.
The charger is intended for charging lead-acid batteries and NiCd batteries. Set the charg-
er to the type of battery to be charged:
- Pb-WET batteries (PzS, GiS, ...):
Venting, closed lead-acid wet batteries with liquid electrolyte.
- Pb-GEL batteries (PzV, GiV, ...):
Valve-regulated, sealed lead-acid batteries (VRLA) with fixed electrolyte (gel or non-
woven fabric).
- NiCd batteries:
Closed or sealed NiCd batteries with liquid electrolyte.
- Pb-CSM-WET batteries (copper strained metal):
Closed lead-acid CSM batteries with liquid electrolyte.
- Lead crystal batteries:
EVFJ/CNFJ-type lead crystal batteries.
Proper handling of the device is essential for it to function correctly. Never pull on the cable
when handling the device.
Grid connection
WARNING!
Danger from electric current.
This can result in serious injury or death.
► Before starting work, switch off all the devices and components involved and discon-
nect them from the grid.
► Secure all the devices and components involved to prevent unintentional restarting.
WARNING!
Danger due to incorrect operation and incorrectly performed work.
This can result in serious injury and damage to property.
► All the work and functions described in this document must only be carried out by
trained and qualified personnel.
► Read and understand this document.
► Read and understand all the Operating Instructions for the system components, espe-
cially the safety rules.
WARNING!
Danger due to faulty or insufficient power supply.
This can result in serious injury and damage to property.
► The power supply requirements detailed in "Technical data" must be met.
To Next Page
Loading...
Need help?
General
