44
The following curve settings are available:
-
Curve - e.g. RI - Pb-WET
-
Charging time - e.g. 5 - 6 h
When opportunity charging is "ON" and a battery is connected, the following appears:
Display when RI characteristic is selected Display for other characteristics (e.g. IUI)
To start opportunity charging:
- Use the "Up" key to select the runner symbol (1).
"Runner symbol" (1)
Display when opportunity charging starts
DC connection DC Connection:
The “DC Connection” menu contains the
setting for the DC connection check.
If the DC connection check is switched on
(“ON”), the connection between the charger
and the battery is checked during the char-
ging process.
If problems arise with the DC connection
during the charging process, status code 17
is set if the DC connection check is active.
A connection problem can occur if, for
example, charging contacts are worn or dir-
ty.
(1)
To Next Page
Loading...
Need help?
General
