56
External start/
stop
The external start/stop option prevents sparking if the charging plug is disconnected during
charging. Special contacts inside the charging plug register a separation from the charging
socket. These are leading contacts in relation to the main contacts. This triggers an imme-
diate stop to charging. As a result there is no wear to the main contacts, and this arrange-
ment safeguards more effectively against an oxyhydrogen explosion.
Temperature-con-
trolled charging
The temperature-controlled charging option always adjusts the charging voltage according
to the current temperature of the battery. This results in considerably longer battery-life, es-
pecially where batteries are used in cold stores.
LED strip The LED strip acts as a status indicator and lights up in the same colours as the display
elements on the control panel. An LED strip including a diffuser is installed in the gap be-
tween the front wall and upper part of the housing.
mm (in.)
464 (18.27)
110 (4.33)
198 (7.8)
278 (10.94)
To Next Page
Loading...
Need help?
General
