27
EN
Interrupting
charging
As long as a battery is connected to the charger, only the charging process can be inter-
rupted and resumed using the "Stop/Start" key. Display modes can be changed using the
"Menu" key as described in the "Display" section, but this is only possible when there is no
battery connected to the charger.
- The green "Battery charged" indicator
is on
- The battery is always ready to use
- The battery can remain connected to
the charger for as long as required
To interrupt the charging process:
Press the "Stop/Start" key
While the charging progress is interrupted:
The "Charge" indicator (yellow) flashes
To resume the charging process:
Press the "Stop/Start" key again
1
2
To Next Page
Loading...
