13
EN
General information
Device concept The technology is embedded in a robust industry-standard housing. The exceptionally
compact design complies with all safety standards, requires less installation space and
protects the components to ensure a long service life.
Fitted with a graphical display, an integrated datalogger, new interfaces and additional op-
tions, the device is perfectly equipped for the future.
Customer-specif-
ic information
If customer-specific information is available for the supplied device, supply them with the
device.
Correct battery
configuration
WARNING!
Danger due to unsuitable batteries being connected to the charger.
Escaping gas, fire or explosion may result in serious injury and damage to property.
► Never connect a battery to the charger unless it is compatible in terms of its type and
voltage and the charger settings are correct.
► The charger must only be used with lithium-ion batteries approved by Fronius.
WARNING!
Danger due to trailing charging leads.
This could result in injury due to getting caught or tripping on loose cables.
► Lay the charging leads so that no one can trip over or become entangled in them.
WARNING!
Danger due to charging plug being pulled out during charging.
This may result in serious injury and damage to property.
► Before pulling out the charging plug, first stop the charging process using the Stop/
Start key.
► Once the charging process is complete, wind up the charging lead or, if available, place
it on the cable holder.
Mains connection
WARNING!
Danger from electric current.
This can result in serious injury or death.
► Before starting work, switch off all the devices and components involved and discon-
nect them from the grid.
► Secure all the devices and components involved to prevent unintentional restarting.
► If required, nothing other than a type B residual current circuit breaker should ever be
used for connecting the device to the mains.
To Next Page
Loading...
