37
EN
Additional func-
tions
The following contains a detailed description of the "additional functions" menu item in con-
figuration mode. Navigation is performed as described in the "Configuration mode" section.
Select the "additional functions" menu
item
Blue LED:
- Setting of the "Blue LED" indicator:
- Governed by state of charge: the blue LED lights up once the set state of charge
(in %) has been reached and remains lit until the charging process is complete.
(100% is treated as the OFF setting: in other words, the blue LED will never light
up.)
- Setting the time (minutes) that should be allowed to pass before the "Blue battery
cooled" down indicator should come on to signal that a battery has cooled down
sufficiently. The time from the end of charging is used as the setting.
- Governed by temperature: the set value is a temperature below which the blue
"battery cooled down" indicator should come on to signal that a battery has cooled
down sufficiently.
The following settings are available when external start/stop is selected:
- Start:
normal ON:
- Charging starts when an external switch is closed and a battery is detected
- Or when the charging plug is connected by closing the auxiliary contacts and a
battery is detected
normal OFF:
- Charging starts when a battery is connected
1
A list appears with the following selection options:
External start/stop:
To Next Page
Loading...
