Code:
- Code entry required / not required to access configuration mode ("Code ON / OFF")
USB Logging Time:
- Time interval (s) for recording char-
ging parameters on the USB flash
drive (USB Logging Time)
Reset statistics
Reset history
For more detailed information on the statistics and history, please refer to the "Statistics
mode" and "History mode" sections.
Reset settings The menu item below "General options" offers two alternative ways of resetting all the
settings:
Reset Factory Settings:
- Resets to factory settings.
Reset Default Settings:
- Resets settings to the manufacturer's
defaults.
USB mode In USB mode, the display shows whether
or not a USB flash drive is connected.
The USB flash drive must conform to the
following specifications:
- Formatting: FAT32
- 32 Gigabyte maximum
- No multiple partitioning
The I-SPoT VIEWER software supports the visualisation and evaluation of data on the
USB flash drive. The I-SPoT VIEWER software can be found online at the following
address: http://www.fronius.com/i-spot.
Only insert the USB flash drive when charging is not in progress or if the charging pro-
cess has been interrupted.
If the charging process is only interrupted, not completed, it is only possible to read out
data. A new update or configuration cannot be loaded.
45
EN
To Next Page
Loading...
Need help?
General
