27
EN
Charging the battery
Starting for the
first time
When the charger is first connected to the mains, the device is in SETUP mode.
The following basic settings must be changed or confirmed in this mode:
- Language (English, German, French, etc.)
- Date, time and time zone
- Length and cross-section of the charging lead
- Type of battery, characteristic, number of cells and charging time or battery capacity
Connect the charger mains plug to the electrical mains supply.
Use the "Up/Down" keys to select the
desired menu language.
Confirm with the "Pause/Start" key.
English is set as the default language.
Use the "Up/Down" keys to select the
time zone.
Confirm with the "Pause/Start" key.
UTC+1 Central European Time (Berlin) is
set as the default time zone.
Adjust the following settings:
- Daylight saving time ON/OFF
- Hour format
- Time
- Date
Use the "Up/Down" keys to select the
desired setting.
Use the "Pause/Start" key to confirm
the setting.
Daylight saving time ON and the 24h format
are used as the default settings.
Use the "Up/Down" keys to set the
length of the charging lead.
Confirm with the "Pause/Start" key.
The charger is configured with the correct
charging lead length as per the order.
An incorrectly set charging lead length can
negatively influence the charging process.
To Next Page
Loading...
Need help?
General
