Fronius Selectiva Series User Manual

44
The "repeat" setting defines how often the alternative charging mode should be performed
until the device reverts to the original charging parameters again:
Setting range
- 1 to 99 repetitions
Disable Start Button
ON
- The charging process cannot be started using the "Pause/Start" key, e.g. to prevent
unauthorised intervention.
OFF
- The charging process can be started using the "Pause/Start" key.
The following settings are also possible:
- Characteristic:
e.g. "Deep discharge 10"
- Number of battery cells:
"Cells" - e.g. 12x
- Battery capacity in Ah:
e.g. 375 Ah
“Opportunity
Charge” special
function
"Opportunity Charge” special function:
To extend the usage interval of a battery, it
is possible to recharge it at a time when it
will not be needed, e.g. during scheduled
plant shutdowns.
The following curve settings are available:
-
Curve - e.g. RI - Pb-WET
-
Charging time - e.g. 5 - 6 h
When opportunity charging is "ON" and a battery is connected, the following appears:

Fronius Selectiva Series Specifications

General

Device Category	Battery Charger
Manufacturer	Fronius
Series	Selectiva
Microprocessor Controlled	Yes
Battery Types	Lead-acid, AGM, Gel
Protection Class	IP20
Protection Features	Reverse polarity, short circuit, overvoltage, overtemperature
Dimensions	Varies by model
Weight	Varies by model
Output Voltage	12/24 V DC