Creating a job
NOTE!
Jobs are not created in the Job mode process.
Jobs can be created in the MIG/MAG pulse synergic welding, MIG/MAG standard syner-
gic welding, MIG/MAG standard manual welding, TIG welding and MMA welding pro-
cesses.
The device comes with no jobs pre-programmed. To create a job, proceed as follows:
1
Set the desired welding parameters that you want to store as a "Job".
2
Briefly press the Store button to change to the job menu
The first vacant program location for the job is indicated.
3
Select the desired program location with the adjusting dial, or else leave the sugges-
ted program location unchanged
126
Toowoomba Welding Supplies : tweld.com.au : Ph +61 7 4659 0044
To Next Page
Loading...