Fronius TransPuls Synergic 5000 User Manual

tS2 | xxx
Note: xxx is a temperature value
Overtemperature in the secondary circuit of the power source
Allow power source to cool down
Cause:
Remedy:
tS3 | xxx
Note: xxx is a temperature value
Overtemperature in the secondary circuit of the power source
Allow power source to cool down
Cause:
Remedy:
Power source -
troubleshooting
tSt | xxx
Note: xxx is a temperature value
Overtemperature in the control circuit
Allow power source to cool down
Cause:
Remedy:
Power source does not function
Mains switch is on, but indicators are not lit up
There is a break in the mains lead; the mains plug is not plugged in
Check the mains lead, ensure that the mains plug is plugged in
Mains socket or mains plug faulty
Replace faulty parts
Mains fuse protection
Change the mains fuse protection
Short circuit on the 24 V supply of SpeedNet connection socket or external
sensor
Unplug connected components
Cause:
Remedy:
Cause:
Remedy:
Cause:
Remedy:
Cause:
Remedy:
183
EN
Toowoomba Welding Supplies : tweld.com.au : Ph +61 7 4659 0044

Fronius TransPuls Synergic 5000 Specifications

General

Brand	Fronius
Model	TransPuls Synergic 5000
Category	AC Power Distribution
Language	English