Fronius TransPuls Synergic 5000 User Manual

Comfort / CrNi / Steel control panel
Difference
between Comfort,
CrNi and Steel
control panels
The Comfort, CrNi and Steel control panels are identical except for the type of material
used in their construction. The following section deals specifically with the Comfort con-
trol panel, but all the functions described apply equally to the CrNi and Steel control pan-
els.
Comfort control
panel
(14)(4)
(1)
(28) (26)
(25)
(5)
(18)
(15)
(12)
(11)
(10)
(3)
(6)
(9)(7)
(16)(8)
(27)
(24)
(23)
(22)
(13)
(2)
(19)
(17)
(20)
(21)
No. Function
(1) Feeder inching button
for feeding the wire electrode into the welding torch‑hosepack without any flow
of gas or current
For information on the various wire feed sequences that are possible when the
welder presses and holds the "Feeder inching" button, see the Fdi parameter
in the Setup menu.
38
Toowoomba Welding Supplies : tweld.com.au : Ph +61 7 4659 0044

Fronius TransPuls Synergic 5000 Specifications

General

Brand	Fronius
Model	TransPuls Synergic 5000
Category	AC Power Distribution
Language	English